Skip to content

HRD+ 74259 Daughterboard verified good

TI-99/4A The subject says it all, really. I got ahold of a couple of 74LS259D SMD chips, soldered them into the adapter board, and replaced the '259 stack in the HRD+ with the daughterboard.

Since nothing ever works correctly the first time, I botched a solder joint on one of the chips and spent an hour with a microscope, a schematic, and a continuity tester to track down the problem.

Anyway, it works. Eagle .sch and .brd are here. Enjoy.

Trackbacks

No Trackbacks

Comments

Display comments as Linear | Threaded

No comments

Add Comment

Enclosing asterisks marks text as bold (*word*), underscore are made via _word_.
Standard emoticons like :-) and ;-) are converted to images.
E-Mail addresses will not be displayed and will only be used for E-Mail notifications.
To leave a comment you must approve it via e-mail, which will be sent to your address after submission.
BBCode format allowed
Form options

Submitted comments will be subject to moderation before being displayed.